INVT CHE100-011G/015P-4 User Manual

CHE Series Sensorless Vector
Control Inverter
Operation Manual
z Thank you very much for your buying CHE series sensorless vector control
inverter.
z
Before use, please read this manual thoroughly to ensure proper usage. Keep this
manual at an easily accessible place so that can refer anytime as necessary.

INVT CHE100-011G/015P-4 Specifications

General

Model	CHE100-011G/015P-4
Power	11 kW / 15 HP
Frequency Range	0-400 Hz
Control Method	V/F control, Sensorless vector control
Communication Interface	RS485, Modbus
Cooling Method	Forced air cooling
Storage Temperature	-20°C to +60°C
Voltage	380V-480V
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating
Humidity	5% to 95% (Non-condensing)
Altitude	Up to 1000m
Operating Temperature	-10°C to +50°C

Summary

Safety Precautions

Safety Warnings and Cautions

General warnings, cautions, and hazard marks for safe operation and installation.

1. Introduction

Product Overview and Features

Covers introduction, technology features, nameplate, selection guide, parts, and dimensions.

2. Inspection and Installation

Inspection and Installation Guidelines

Procedures for unpacking inspection, environmental requirements, and mounting.

4. Wiring

Wiring Principles and Components

Covers peripheral connections, terminals, diagrams, and component specifications.

Main and Control Circuit Wiring

Detailed instructions for wiring main and control circuits, including EMC guidelines.

5. Operation

Keypad, Operation Process, and States

Explains keypad usage, operation steps, running states, and quick testing.

6. Detailed Function Description

Function Groups P0-P7: Control and Interface Settings

Details on basic, start/stop, motor, vector, V/F, terminals, and display functions.

Function Groups P8-PD: Advanced and Specialized Functions

Covers enhanced, PID, speed, protection, communication, and supplementary functions.

7. Troubleshooting

Fault Codes and Solutions

Comprehensive guide to identifying and resolving inverter faults and issues.

8. Maintenance

Maintenance and Warranty

Guidelines for daily, periodic maintenance, part replacement, and warranty.

9. Function Parameters

Parameter Listings (P0-P9)

Lists parameters for basic, start/stop, motor, vector, V/F, input/output, and display functions.

Parameter Listings (P8-PD)

Lists parameters for enhanced, multi-step speed, protection, communication, and supplementary functions.

10. Communication Protocol

Protocol Details and Examples

Information on interfaces, modes, formats, commands, and communication examples.