INVT CHV100 Series User Manual

CHV Series Close loop Vector
Control Inverter
Operation Manual
z Thank you very much for your buying CHV series close loop vector control
inverter.
z Before use, please read this manual thoroughly to ensure proper usage. Keep
this manual at an easily accessible place so that can refer anytime as necessary.

INVT CHV100 Series Specifications

General

Protection Level	IP20
Cooling Method	Forced air cooling
Enclosure Rating	IP20
Output Power	0.4kW~630kW
Control Mode	V/F control
Input Frequency	50Hz/60Hz
Output Frequency	0~600Hz
Protection Functions	Overcurrent, overvoltage, undervoltage, overload, overtemperature, phase loss, short circuit
Communication Protocols	Modbus
Operating Temperature	-10°C~+40°C
Braking	Built-in braking unit (optional), external braking resistor
Overload Capacity	150% for 60 seconds, 180% for 3s
Ambient Temperature	-10°C to +40°C (derating above 40°C)
Storage Temperature	-20°C~+60°C
Altitude	Less than 1000m (derating above 1000m)
Humidity	Less than 95% RH, no condensation