EasyManuals Logo
Home>INVT>DC Drives>CHV100 Series

INVT CHV100 Series User Manual

INVT CHV100 Series
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Disassemble and Installation
12
3.1 Environmental Requirement
3.1.1 Temperature
Environment temperature range: -10°C ~ +40°C. Inverter will be derated if ambient
temperature exceeds 40°C.
3.1.2 Humidity
Less than 95% RH, without dewfall.
3.1.3 Altitude
Inverter can output the rated power when installed with altitude of lower than 1000m. It
will be derated when the altitude is higher than 1000m. For details, please refer to the
following figure:
Figure 3.1 Relationship between output current and altitude.
3.1.4 Impact and Oscillation
It is not allowed that the inverter falls down or suffers from fierce impact or the inverter
installed at the place that oscillation frequently.The maximum swing should less than
5.8m/S
2
(0.6g).
3.1.5 Electromagnetic Radiation
Keep away from the electromagnetic radiation source.
3.1.6 Water
Do not install the inverter at the wringing or dewfall place.
3.1.7 Air Pollution
Keep away from air pollution such as dusty, corrosive gas.
3.1.8 Storage
Do not store the inverter in the environment with direct sunlight, vapor, oil fog and
vibration.
(
m
)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the INVT CHV100 Series and is the answer not in the manual?

INVT CHV100 Series Specifications

General IconGeneral
BrandINVT
ModelCHV100 Series
CategoryDC Drives
LanguageEnglish

Related product manuals