INVT GD300-1R5G-4

Goodrive300 Series VFD Function parameters
81
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
P06.21
AO1 output
filter time
10V (20mA)
0.0% 100.0%
AO
Setting range of P06.17: -100.0%–P06.19
Setting range of P06.18: 0.00V–10.00V
Setting range of P06.19: P06.17–100.0%
Setting range of P06.20: 0.00V–10.00V
Setting range of P06.21: 0.000s–10.000s
Setting range of P06.22: -100.0%–P06.24
Setting range of P06.23: 0.00V–10.00V
Setting range of P06.24: P06.22–100.0%
Setting range of P06.25: 0.00V–10.00V
Setting range of P06.26: 0.000s–10.000s
Setting range of P06.27: -100.0%–P06.29
Setting range of P06.28: 0.00–50.00kHz
Setting range of P06.29: P06.27–100.0%
Setting range of P06.30: 0.00–50.00kHz
Setting range of P06.31: 0.000s–10.000s
0.000s
○
P06.22
Lower output
limit of AO2
0.0%
○
P06.23
Corresponding
AO2 output of
lower limit
0.00V
○
P06.24
Upper output
limit of AO2
100.0%
○
P06.25
The
corresponding
AO2 output of
upper limit
10.00V
○
P06.26
AO2 output
filter time
0.000s
○
P06.27
Lower output
limit of HDO
0.0%
○
P06.28
Corresponding
HDO output of
lower limit
0.00kHz
○
P06.29
Upper output
limit of HDO
100.0%
○
P06.30
Corresponding
HDO output of
upper limit
50.00kH
z
○
P06.31
HDO output
filter time
0.000s
○
P07 Group Human-Machine Interface
P07.00
User’s
password
0–65535
The password protection will be valid when
setting any non-zero number.
00000: Clear the previous user’s password, and
make the password protection invalid.
After the set user’s password becomes valid, if
the password is incorrect, users cannot enter the
parameter menu. Only correct password can
make the user check or modify the parameters.
0
○