INVT Goodrive GD300-19-015G-4

Goodrive300-19 series open loop vector inverter special for hosit Function parameters
-57-
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
2: Output at DC braking current at stopping
P02 Group Motor 1
P02.01
Rated power
of
asynchronous
motor 1
0.1~3000.0kW
Set the parameters of the
controlled asynchronous
motor.
To ensure control
performance, set P02.01~
P02.05 correctly according to
AM name plate.
Goodrive-19 inverters provide
parameter autotuning function.
Accurate parameter autotuning
results from correct
parameters setting.
To ensure control
performance, configure the
motor according to standard
adaptive motor. If the motor
power and standard adaptive
motor have a great gap,
control performance will
decrease obviously.
Note: Resetting P02.01 can
initialize P02.02~P02.10.
Depend
on
model
◎
P02.02
Rated
frequency of
asynchronous
motor 1
0.01Hz~P00.03
(the Max. frequency)
50.00Hz
◎
P02.03
Rated speed
of
asynchronous
motor 1
1~36000rpm
Depend
on
model
◎
P02.04
Rated voltage
of
asynchronous
motor 1
0~1200V
Depend
on
model
◎
P02.05
Rated current
of
asynchronous
motor 1
0.8~6000.0A
Depend
on
model
◎
P02.06
Stator resistor
of
asynchronous
motor 1
0.001~65.535Ω
After completing parameters
autotuning, P02.06~P02.10
will update automatically. As
the basic parameters of high
performance vector control,
the parameters have a direct
impact on control
performance.
Note: Users cannot modify
Depend
on
model
○
P02.07
Rotor resistor
of
asynchronous
motor 1
0.001~65.535Ω
Depend
on
model
○
P02.08
Leakage
0.1~6553.5mH
Depend
○