Need help?Do you have a question about the INVT Goodrive 200 and is the answer not in the manual?
General| Protection Class/Enclosure Rating | IP20 |
|---|---|
| Cooling Method | Forced air cooling |
| Communication Protocol/Interfaces | Modbus |
| Braking Unit | Built-in or external (optional) |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, short circuit, overheating |
| Ambient Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | ≤95% RH (non-condensing) |
| Altitude | Below 1000m, derated use above 1000m |
Essential safety rules for operating and installing the inverter to prevent hazards.
Steps for initial setup and basic operation of the inverter after installation.
Detailed technical specifications, including input/output, control features, and interfaces.
Wiring diagrams for the main circuit, illustrating connections for different inverter configurations.
Instructions on how to navigate menus, modify function codes, and set parameters via the keypad.
Detailed description of function codes and their parameters organized into groups.
Guidance on identifying, resolving, and resetting various inverter faults and alarms.
Recommended routine maintenance checks and intervals for optimal inverter performance.
Introduction to the Modbus protocol, its modes, and network structure for inverter communication.
Information on electromagnetic compatibility requirements and inverter categories.
Detailed dimensional drawings and installation charts for various inverter models.
Guidance on selecting and using braking resistors or units to prevent inverter damage.
To Next Page