INVT Goodrive 200 - Fixed-Length Control

Goodrive200 inverters Basic operation instruction
179
Function
code
Name Detailed instruction of parameters
Default
value
P05.00 HDI input type selection
0:HDI is high pulse input
1:HDI is switch input
0
P05.40
Corresponding setting of
the upper limit of AI2
0:Frequency setting input
1:Counter input
2:Length counting input
0
P05.01~
P05.09
Digital input function
selection
28:Counter reset
31:Counter trigger
P06.01~
P06.04
Digital output function
selection
17:Completion of simple PLC cycle
18:Setting count value arrival
P08.25 Setting counting value
P08.26~65535 0
P08.26 Reference counting value
0~P08.25 0
P17.18 Counting value 0~65535 0
7.16 Fixed-length control
Goodrive200 series inverters support fixed-length control function which can input length counting
pulse through HDI, and then count the actual length according to the internal counting formula. If
the actual length is longer than or equal to the set length, the digital output terminal can output the
length arrival pulse signal of 200ms and the corresponding length will be cleared automatically.
Note: the length arrival belongs to pulse output and the lasting time is 200ms.
Function
code
Name Detailed instruction of parameters
Default
value
P05.00 HDI input type selection
0:HDI is high pulse input
1:HDI is switch input
0
P05.40
Corresponding setting of
the upper limit of AI2
0:Frequency setting input
1:Counter input
0