INVT Goodrive 200 - Fault Procedure

Goodrive200 inverters Basic operation instruction
180
Function
code
Name Detailed instruction of parameters
Default
value
2:Length counting input
P05.01~
P05.09
Digital input function
selection
32: Length reset
P06.01~
P06.04
Digital output function
selection
20: Length arrival
P08.19 Setting length 0~65535m 0
P08.20 Actual length 0~65535m 0
P08.21 Pulse per rotation 1~10000 1
P08.22 Alxe perimeter 0.01~100.00cm 10.00cm
P08.23 Length ratio 0.001~10.000 1.000
P08.24 Length correcting
coefficient
0.001~1.000 1.000
P17.17 Length 0~65535 0
7.17 Fault procedure
Goodrive200 series inverters provide sufficient fault procedure information for the convenience of
user’s application.