GD200-132G/160P-4 ACL2-132-4 DCL2-132-4 OCL2-132-4
GD200-160G/185P-4 ACL2-160-4 DCL2-160-4 OCL2-160-4
GD200-185G/200P-4 ACL2-200-4 DCL2-200-4 OCL2-200-4
GD200-200G/220P-4 ACL2-200-4 DCL2-200-4 OCL2-200-4
GD200-220G/250P-4 ACL2-250-4 DCL2-250-4 OCL2-250-4
GD200-250G/280P-4 ACL2-250-4 DCL2-250-4 OCL2-250-4
GD200-280G/315P-4 ACL2-280-4 DCL2-280-4 OCL2-280-4
GD200-315G/350P-4 ACL2-315-4 DCL2-315-4 OCL2-315-4
GD200-350G/400P-4 Standard DCL2-350-4 OCL2-350-4
GD200-400G-4
Standard
DCL2-400-4 OCL2-400-4
GD200-500G-4
Standard
DCL2-500-4 OCL2-500-4
Note:
1. The rated derate voltage of the input reactor is 2%±15%.
2. The power factor of the input side is above 90% after adding DC reactor.
3. The rated derate voltage of the output reactor is 1%±15%.
4. Above options are external, the customer should indicate when purchasing.
C.7 Filter
Goodrive200 series inverters have embedded C3 filters which can be connected by J10.
The input interference filter can decrease the interference of the inverter to the surrounding
equipments.
Output interference filter can decrease the radio noise cause by the cables between the
inverter and the motor and the leakage current of the conducting wires.
Our company configured some filters for the convenient of the users.
To Next Page
Loading...
