INVT Goodrive 200 - Page 246

Goodrive200 inverters
Appendix C
245
C.7.1 Filter type instruction
Character
designation
Detailed instruction
A FLT:inverter filter seriee
B
Filter type
P:power supply filter
L:output filter
C
Voltage degree
04:3-phase 380Vac
D 3 bit rated current code “015” means 15A
E
Installation type
L: Common type
H: High performance type
F
Utilization environment of the filters
A: The first envirtonment (IEC61800-3:2004) category C1 (EN
61800-3:2004)
B: Tthe first envirtonment (IEC61800-3:2004) category C2 (EN
61800-3:2004)
C: The second envirtonment (IEC61800-3:2004) category C3 (EN
61800-3:2004)
C.7.2 Filters selection table
The inverter Input filter Output filter
GD200-1R5G-4
GD200-2R2G-4
FLT-P04006L-B FLT-L04006L-B
GD200-004G/5R5P-4
GD200-5R5G/7R5P-4
FLT-P04016L-B FLT-L04016L-B
GD200-7R5G/011P-4
GD200-011G/015P-4
FLT-P04032L-B FLT-L04032L-B
GD200-015G/018P-4
GD200-018G/022P-4
FLT-P04045L-B FLT-L04045L-B
GD200-022G/030P-4
GD200-030G/037P-4
FLT-P04065L-B FLT-L04065L-B
GD200-037G/045P-4
GD200-045G/055P-4
FLT-P04100L-B FLT-L04100L-B