Need help?Do you have a question about the INVT Goodrive GD300-19-015G-4 and is the answer not in the manual?
General| Model | GD300-19-015G-4 |
|---|---|
| Type | Inverter |
| Rated Power | 15 kW |
| Output Current | 30A |
| Protection Level | IP20 |
| Cooling Method | Forced air cooling |
| Storage Temperature | -20°C to +60°C |
| Communication Interface | RS485 |
| Operating Temperature | -10°C to +50°C |
| Humidity | 5% - 95% (non-condensing) |
| Altitude | ≤ 1000m |
Outlines general safety guidelines for inverter operation, wiring, and maintenance.
Provides safety instructions for handling and installing the inverter.
Details safety measures during commissioning and operation of the inverter.
Specifies safety procedures for maintaining and replacing inverter components.
Details environmental requirements for inverter installation and usage.
Outlines essential steps for basic commissioning before inverter utilization.
Covers the procedures for connecting power and control circuits.
Details how to connect the main power input and output terminals.
Explains how to connect control signals and auxiliary power.
Explains how faults are indicated on the keypad and TRIP LED.
Explains how to operate the inverter via the operation panel.
Details the menu structure and procedure for modifying function codes.
Provides an overview of how function parameters are organized into groups.
Details basic functions like speed control mode and running command channel.
Covers motor parameters, AVR, Function restore.
Details parameters related to starting and stopping the motor.
Covers Restart after power off, Start delay time, 0Hz output selection.
Details parameters for configuring Motor 1.
Covers Motor overload protection and correction coefficient.
Details parameters for vector control mode.
Covers Lowest weakening point, Max voltage limit, Pre-exciting time.
Details parameters for configuring digital and analog input terminals.
Covers HDI input settings and filters.
Covers Modbus communication settings like address and baud rate.
Covers common communication faults.
Details the importance and selection of braking components.
Provides guidance on selecting braking resistors and units based on torque and usage.
To Next Page