INVT Goodrive GD300-19-015G-4 - Page 63

Goodrive300-19 series open loop vector inverter special for hosit Function parameters
-62-
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
Note: Setting modes 2~7, 100% corresponds to
three times of the rated current of the motor.
P03.12
Keypad
setting
torque
Setting range: -300.0%~300.0% (rated current of the
motor)
50.0%
○
P03.13
Torque
reference
filter time
0.000~10.000s
0.010s
○
P03.14
Upper
frequency of
forward
rotation in
torque
control
0: Keypad (P03.16 sets P03.14, P03.17 sets P03.15)
1: AI1
2: AI2
3: AI3
4: Pulse frequency HDI setting upper-limit frequency
5: Multi-step setting upper-limit frequency
6: Modbus communication setting upper-limit
frequency
7~9: Reserved
Note: Setting modes 1~6, 100% corresponds to
the maximum frequency.
0
○
P03.15
Upper
frequency of
reverse
rotation in
torque
control
0
○
P03.16
Keypad
setting for
upper
frequency of
forward
rotation
This function is used to set the upper limit of the
frequency. P03.16 sets the value of P03.14; P03.17
sets the value of P03.15.
Setting range: 0.00 Hz~P00.03 (the Max. output
frequency)
50.00Hz
○
P03.17
Keypad
setting for
upper
frequency of
reverse
rotation
50.00Hz
○