INVT Goodrive GD35-011G-4-H1

Goodrive35 Series Closed-loop Vector Control VFD Basic operation instruction
199
Function
code
Name
Detailed instruction of parameters
Default
value
36: Undervoltage fault (LL)
37: Encoder offline fault (ENC1O)
38: Encoder reverse fault (ENC1D)
39: Encoder pulse Z offline fault
(ENC1Z)
43: Motor overtemperature fault (OT)
P07.33
Running frequency at present fault
0.00 Hz
P07.34
Ramp reference frequency at present fault
0.00 Hz
P07.35
Output voltage at present fault
0 V
P07.36
Output current at present fault
0.0 A
P07.37
Bus voltage at present fault
0.0 V
P07.38
Max temperature at present fault
0.0°C
P07.39
Input terminal state at present fault
0
P07.40
Output terminal state at present fault
0
P07.41
Running frequency at last fault
0.00 Hz
P07.42
Ramp reference frequency at last fault
0.00 Hz
P07.43
Output voltage at last fault
0 V
P07.44
Output current at last fault
0.0 A
P07.45
Bus voltage at last fault
0.0 V
P07.46
Max temperature at last fault
0.0°C
P07.47
Input terminals state at last fault
0
P07.48
Output terminal state at last fault
0
P07.49
Running frequency at last but one fault
0.00 Hz
P07.50
Output voltage at last but one fault
0.00 Hz
P07.51
Output current at last but one fault
0 V
P07.52
Output current at last but one fault
0.0 A
P07.53
Bus voltage at last but one fault
0.0 V
P07.54
Highest temperature at last but one fault
0.0°C
P07.55
Input terminal state at last but one fault
0
P07.56
Output terminal state at last but one fault
0