INVT iMars BG12KTR

iMars grid-tied solar inverters Safety precautions
8
protective measures, such as protective shoes and work clothes.
z Only qualified electricians are allowed to install the inverter.
z Do not put and install the inverter on or close to combustible materials.
z Keep the installation site away from children and other public places.
z Remove the metal jewelry such as ring and bracelet before installation and
electrical connection to avoid electric shock.
z Do cover solar modules with light-tight materials. Exposed to sunlight, solar
modules will output dangerous voltage.
z The inverter input voltage does not exceed the maximum input voltage;
otherwise inverter damage may occur.
z The positive and negative pole of solar module
s can not be grounded, otherwise
irrecoverable damage may occur.
z Ensure the proper grounding of the inverter
, otherwise, improper connection or
no grounding may cause stop of the inverter.
z Ensure reliable installation and electrical connection.
z When the photovoltaic generator cells are exposed to light (even if i
t is dim), the
generator supplies DC voltage to the inverter.
Note: iMars grid-tied solar inverters are only for crystalline silicon solar modules.
1.2.2 Grid-tied operation

z Only qualified electricians are allowed to operate the inverter under the
permission of local power departments.
z All electrical connections must meet the electrical standards of the
countries/regions in which the project is located.
z Ensure reliable installation and electrical connection before operation.

z Do not open the cover of inverter during operation or voltage is present. 
1.2.3 Maintenance and inspection

z O
nly qualified electricians are allowed to perform the maintenance, inspection,
and components replacement of the inverter.
z Contact with the local dealer or supplier for maintenance.
z In order to avoid irrelevant personnel from entering the maintenance area
during