Need help?Do you have a question about the InWin 309 and is the answer not in the manual?
General| Type | ATX Mid Tower |
|---|---|
| Material | Steel, Tempered Glass |
| Motherboard Compatibility | ATX, Micro-ATX, Mini-ITX |
| CPU Cooler Height Support | 160 mm |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| PSU Compatibility | ATX |
| Maximum CPU Cooler Height | 160 mm |
| Maximum PSU Length | 200 mm |
| Cooling Support | Air and Liquid Cooling |
| Front I/O Ports | 2 x USB 3.0, 1 x USB Type-C, Audio In/Out |
| Fan Support | Top: 120mm Fan x 3 Rear: 120mm Fan x 1 |
| Radiator Support | Rear: 120mm |
Covers initial steps like opening the chassis, clock synchronization, and power supply installation.
Details on connecting front panel I/O wires to the motherboard, including HD Audio and USB 3.0 headers.
Explains how to use the I/O panel buttons to control LED brightness, lighting effects, and fan speed.
Instructions for downloading, installing, and launching the InWin GLOW2 software for lighting control.
Details the software's capabilities including color selection, light/speed adjustments, fan output control, and software options.
To Next Page
