To Next PageTo Next PageHow to change the restart timeout on Inxpect SBV System?
To address an inadequate restart timeout in your Inxpect Radar system, use the Inxpect Safety application. Navigate to Configuration, then select the affected sensor and detection field to adjust the restart timeout setting.
What to do if objects obstruct the view of Inxpect Radar?
If objects obstruct the field of view of your Inxpect Radar, try removing the obstructing object if possible. If removing the object isn't feasible, implement additional safety measures in the area where the obstruction is present.
General| Technology | FMCW Radar |
|---|---|
| Operating Frequency | 24 GHz |
| IP Rating | IP67 |
| Update Rate | 50 Hz |
| Power Supply | 24 VDC |
| Detection Range | Up to 4 meters |
| Safety Category | PLd (EN ISO 13849-1) |
| Certifications | CE |
Details the manual's purpose, obligations, and provided documentation.
Lists updates made to the instruction manual across different versions.
Identifies the target audience for the instruction manual.
Provides essential safety warnings, symbols, and required personnel skills.
Details the SBV System Series' certifications and intended applications.
Guidelines for electrical installation to ensure EMC compliance.
General warnings regarding installation, configuration, and system operation.
Specific warnings for the restart prevention function's operation.
Outlines responsibilities of the machinery manufacturer and system installer.
Defines the limitations of the SBV System Series' detection capabilities.
Instructions for proper disposal of the system's components.
Lists relevant standards, directives, and CE compliance for the system.
Introduction, definition and special features of the SBV System Series.
Details supported control units, their architectures, functions, and structures.
Explains SBV-01 sensor functions, structures, and status LEDs.
Describes Inxpect Safety app functions, usage, access, and main menu.
Covers Fieldbus support, machinery communication, and data exchange.
Details Modbus support, communication enabling, and data exchange.
Explains system configuration and dynamic configuration methods.
Explains how the SBV-01 sensor works, including factors influencing signals.
Details detection field parameters, angular coverage, and distance.
Describes safety working modes like Both, Always Access, and Always Restart.
Explains the default safety mode, including access detection and restart prevention.
Details the Always access detection mode and its parameters.
Describes the Always restart prevention mode and its parameters.
Explains the option to detect static objects for restart prevention.
Covers cases where restart prevention function is not guaranteed.
Explains the Muting function, its enabling, and activation conditions.
Details the anti-rotation function and its checks when disabled.
Explains the anti-masking function, causes, settings, and checks.
Determining factors for sensor installation height and inclination.
Describes areas and dimensions of the sensor's field of view.
Provides the formula and factors for calculating the dangerous area depth.
Explains how to calculate detection distances based on sensor inclination and height.
Offers recommendations for sensor positioning for access detection and entrances.
Details speed limits, detection conditions, and restart prevention for moving installations.
Provides recommendations for outdoor installations and sensor covers.
Lists required materials, operating system, and Inxpect Safety application installation.
Step-by-step guide to install the control unit and configure the system.
Procedures to validate access detection and restart prevention functions.
Covers configuration reports, changing configuration, backup, and loading.
Details functions like language change, application type, locating motion, and factory reset.
Guides on troubleshooting control unit and sensor LEDs and other problems.
Explains how to download and interpret system event logs.
Details various INFO events logged by the system.
Lists and explains error events related to the control unit.
Lists and explains error events related to the SBV-01 sensor.
Details error events related to the CAN bus communication.
Provides detailed technical specifications and safety parameters of the system.
Details terminal blocks, connector pin-outs, and voltage/current limits for digital inputs.
Illustrates electrical connections for safety outputs, stop/restart signals, and muting.
Lists and explains all configurable parameters for the system.
Explains digital input signals like stop, muting, and restart signals.
Information regarding system software, configuration, and competence.
Guidance on proper disposal of the system according to European directives.
Provides customer service contact information and warranty details.
