Inxpect SBV System Series - 3.3 SBV-01 sensors

20
SBV System Series| Instruction manual v1.2 DEC 2021 |SAF-UM-SBVBus-en-v1.2|© 2021 Inxpect SpA
3. Get to know SBV System Series
3.3 SBV-01 sensors
3.3.1 Functions
The sensors perform the following functions:
l Detect motion in their field of view.
l Send the motion detection signal to the control unit through CAN bus.
l Signal to the control unit through CAN bus the failures or faults detected on the sensor during diagnostics.
3.3.2 2-axes structure
Part Description
A Sensor
B Status LED
C Tamper-proof screws to position the sensor at a specific angle around x-axis (tilt 10° steps)
D Mounting bracket
E Screw to position the sensor at a specific angle around y-axis (pan 10° steps)
F Connectors for connecting the sensors in a chain and to the
3.3.3 3-axes structure
Part Description
A Sensor
B Status LED
C Tamper-proof screws to position the sensor at a specific angle around x-axis (tilt 10° steps)