Name: Inxpect SBV System Series
Brand: Inxpect
Rating: 4 (1 reviews)

To Next Page

To Previous Page

8. Technical references

8.5 Digital input signals

8.5.1 Stop signal

Part Description

Detection signal 1

Detection signal 2

Both deactivate on the falling edge of, at least, one of the two input channels of the input

signal. They remain in OFF-state as long as one of the two input channels remains to the

low logic status (0).

Stop signal CH1

Stop signal CH2

Interchangeable channel. Both channels must go to low logic level (0) to set Detection

signal 1 and Detection signal 2 to OFF-state.

Diff Less than 50 ms. If the value is greater than 50 ms, the diagnostic alarm starts and the

system deactivates the safety outputs.

Dt Activation delay. Less than 5 ms.

Questions and Answers:

Need help?

Do you have a question about the Inxpect SBV System Series and is the answer not in the manual?

Inxpect SBV System Series Specifications

General