Inxpect SBV System Series

To Next Page

To Previous Page

Only when there are no restrictions does the function ensure that a person is detected when standing up [D].

4. Functioning principles

Main Page

Table of Contents3
Glossary of Terms4
This Manual6
Information on this Manual6
Safety8
Safety Information8
Conformity11
Get to Know SBV System Series12
SBV System Series12
SBV System Series Control Units14
Sensors20
Inxpect Safety Application21
Fieldbus Communication23
Modbus Communication24
System Configuration25
Functioning Principles27
Sensor Functioning Principles27
Detection Fields28
Safety Working Modes and Safety Functions32
Safety Working Mode: both (Default)32
Safety Working Mode: Always Access Detection33
Safety Working Mode: Always Restart Prevention33
Restart Prevention Function: Static Object Detection Option34
Features of the Restart Prevention Function34
Muting37
Anti-Tampering Functions: Anti-Rotation Around Axes38
Anti-Tampering Functions: Anti-Masking39
Sensor Position42
Basic Concepts42
Sensor Field of View43
Dangerous Area Calculation45
Calculation of Range of Distances46
Sensor Position Recommendations47
Installations on Moving Elements48
Outdoor Installations49
Installation and Use Procedures51
Before Installation51
Install and Configure SBV System Series52
Validate the Safety Functions59
Manage the Configuration61
Other Functions62
Maintenance and Troubleshooting64
Troubleshooting64
Event Log Management67
INFO Events71
ERROR Events (Control Unit)73
ERROR Events (Sensor)75
ERROR Events (CAN Bus)76
Cleaning and Spare Parts77
Technical References78
Technical Data79
Terminal Blocks and Connector Pin-Outs82
Electrical Connections84
Parameters91
Digital Input Signals94
Appendix99
System Software99
Disposal100
Service and Warranty100

Inxpect SBV System Series - Page 35

Table of Contents