Step 5
Read the License Agreement and click “I Agree”
then click “Next” if you wish to continue with the
rmware upgrade. Otherwise, click “Cancel” to
exit.
Step 6
Choose the correct KVM* that you wish to perform
rmware upgrade from the “Device List” and then
click “Next” to continue. Then the Firmware Upgrade
Utility will verify if there is a KVM connected to the
computer by the rmware upgrade cable. (Check
Firmware Version checkbox is optional)
*Note: Please choose MAIN to proceed the
rmware upgrade. IO1 and IO2 are sub layers in
the KVMs rmware.
To Next Page
Loading...
