Need help?Do you have a question about the ION F10 and is the answer not in the manual?
Follow all instructions for safe installation and operation. Read manual before use.
Connect to grounded outlets, avoid user serviceable parts, unplug before component installation.
Install in controlled environments, avoid aquariums and laser printers.
Unpack the UPS unit and understand its basic function for power loss protection.
Calculate total VA requirements and ensure equipment does not exceed UPS capacity.
Connect equipment, plug into outlet, turn on, handle overloads, and maintain battery.
Identifies key components like the power switch, LED, outlets, ports, and circuit breaker.
Details output capacity, input voltage, frequency, waveform, transfer time, and overload protection.
Covers dimensions, weight, ports, auto features, operating conditions, approvals, and warranty.
Explains LED states (On, Flash, On/Flash) and corresponding alarm conditions and causes.
Provides solutions for issues like no power, short runtime, or unit not turning on.
Instructions for downloading and installing the Power Master management software for UPS monitoring.
Follow all instructions for safe installation and operation. Read manual before use.
Connect to grounded outlets, avoid user serviceable parts, unplug before component installation.
Install in controlled environments, avoid aquariums and laser printers.
Unpack the UPS unit and understand its basic function for power loss protection.
Calculate total VA requirements and ensure equipment does not exceed UPS capacity.
Connect equipment, plug into outlet, turn on, handle overloads, and maintain battery.
Identifies key components like the power switch, LED, outlets, ports, and circuit breaker.
Details output capacity, input voltage, frequency, waveform, transfer time, and overload protection.
Covers dimensions, weight, ports, auto features, operating conditions, approvals, and warranty.
Explains LED states (On, Flash, On/Flash) and corresponding alarm conditions and causes.
Provides solutions for issues like no power, short runtime, or unit not turning on.
Instructions for downloading and installing the Power Master management software for UPS monitoring.
General| Capacity | 1000 VA / 600 W |
|---|---|
| Frequency | 50/60 Hz |
| Topology | Line Interactive |
| Waveform | Simulated Sine Wave |
| Output Frequency | 50/60 Hz ± 1 Hz |
| Typical Backup Time | 5-10 minutes (depending on load) |
| Communication Interface | USB |
| Input Frequency | 50/60 Hz |
| Transfer Time | 4-8ms |
| Battery Type | Sealed Lead Acid |
| Recharge Time | 4-6 hours to 90% |
| Output Connections | 4 x IEC Outlets |
| Output Voltage | 220/230/240VAC |
To Next Page
