ION F10 - Page 7

ION F10 850VA
User Guide
7
5. If an overload is detected, an audible alarm will sound
and the unit will emit one long beep. To correct this,
turn the UPS o and unplug at least one piece of
equipment from the outlets. Wait 10 seconds. Make
sure the circuit breaker is depressed and then turn the
UPS on.
6. Your UPS is equipped with an auto-charge feature.
When the UPS is plugged into an AC outlet, the baery
will automacally recharge.
7. To maintain opmal baery charge, leave the UPS
plugged into an AC outlet at all mes.
8. To store your UPS for an extended period, cover it and
store with the baery fully charged. Recharge the
baery every three months to ensure baery life.