ION SYST0101CW - 6.3.2.5. Fan Coil G-Terminal Alert; 6.3.2.6. Fan Coil G Terminal Alert Label; 6.3.3. Furnace

24
A13229
6.3.2.5. Fan Coil G-Terminal Alert
Use the alert function to select the contact state for an alert. Select Normally Open or
Normally Closed, and then save your selection.
A13230
Shutdown: This setup option selects the change of state required for shutdown. Select
Normally Open or Normally Closed, and then save your selection.
6.3.2.6. Fan Coil G Terminal Alert Label
Once the G Terminal Alert label has been entered, it is shown both on the main screen and in the
notification email when the alert becomes active.
A14224
6.3.3. Furnace
First touch SETUP, then touch FURNACE to set up the parameters for the furnace unit.