47
7.1. Setup and Status Information (Homeowner’s Router)
To establish Wi-Fi® connectivity to the Ion System Control using the in-home router or
wireless access point, the wireless access point SSID and password/passkey must be known for
set-up.
A170241I
• Select WIRELESS from the menu screen.
• Make sure the Wi-Fi connection is enabled, by touching ENABLED.
• Touch SETUP A WI-FI CONNECTION to begin the process.
• Next, touch SCAN FOR AVAILABLE ACCESS POINTS.
A13235
• On the next screen look for the SSID of the router. After being selected, it will be outlined in
faint blue and indicated by a check mark. Then select NEXT.
A150175
• The selected network will show. Choose an appropriate Wi-Fi network security mode.
Usually auto-detect will correctly identify the type of security mode used. If the network has
To Next Page
Loading...
