iOptron iPolar User Manual

3
NOTE: If the software cannot connect to the camera, please check your computer camera settings.
Make sure to change "camera privacy" settings to allow apps to use the camera.
3.3. Initial Settings
Click on Settings to bring up Settings window.
3.4. Set Location and Atmospheric Parameters
Enter Manually
(1) Click on Change button
(2) Enter location info, i.e., latitude and longitude number (GPS coordinates). Northern
hemisphere is “+”, southern “-“ for latitude; eastern “+”, western “-“ for longitude.

iOptron iPolar Specifications

General

Sensor Type	CMOS
Resolution	1280 x 960
Interface	USB 2.0
Type	Electronic Polar Scope
Accuracy	30 arcseconds
Software	iPolar Software
Operating Temperature	-20°C to 50°C
Humidity	10% to 90% non-condensing
Power Requirements	5V DC via USB
Storage Temperature	-20°C to 60°C