iOptron iPolar User Manual

4
(3) Enter atmospheric parameters, i.e., temperature and barometric pressure. If the observation
site is near equators (lower latitude, N10° ~S10°), or is at high elevation (3000 meter or higher
above sea level), please enter the barometric pressure and temperature as precise as
possible.
Otherwise you may choose default atmospheric settings, just click on Default Atmospheric
Parameters. The default value is 10°C and 101325Pa.
(4) Click Confirm to complete the location setting.

iOptron iPolar Specifications

General

Sensor Type	CMOS
Resolution	1280 x 960
Interface	USB 2.0
Type	Electronic Polar Scope
Accuracy	30 arcseconds
Software	iPolar Software
Operating Temperature	-20°C to 50°C
Humidity	10% to 90% non-condensing
Power Requirements	5V DC via USB
Storage Temperature	-20°C to 60°C