Need help?Do you have a question about the IP Camera IP Vandal Dome and is the answer not in the manual?
General| IR Range | Up to 30m |
|---|---|
| Vandal Resistance | IK10 |
| Resolution | 1920x1080 (Full HD) |
| Lens | 2.8mm |
| Power Supply | PoE or 12V DC |
| Operating Temperature | -30°C to 60°C |
| Video Compression | H.265, H.264 |
| Protocols | HTTP, HTTPS |
| Ethernet | 10/100 Mbps |
| Storage | MicroSD card slot |
Configure display settings for optimal viewing.
Connect power, network, and I/O terminals for the camera.
Assign IP address, subnet mask, and gateway to the camera.
Install browser component for live video streaming.
Configure server name, language, overlay, and time settings.
Set IP assignment, PPPoE, DDNS, and ports.
Adjust image quality, video resolution, frame rate, and audio.
Configure motion detection, network checks, and I/O triggers.
Direct connection via ADSL/Cable modem with real IP or PPPoE.
Connection via switch, ADSL/Cable modem with real IP or PPPoE.
Connection via IP sharing, ADSL/Cable modem with virtual IP.
To Next Page
