55
Step 2: Configure Interface and DHCP Server
1. Configure a DHCP server to communicate with VLAN 50.
1) Choose Network Setting > Network Setting > Interface and DHCP Server.
2) Click Add.
3) Configure the parameters in the window.
VLAN Interface: Select "vlan50".
IP Address: Set an IP address for the VLAN interface, such as "192.168.50.1".
Subnet Mask: You can keep the default value.
DHCP Server: Select "Enable".
Assign IP to: Select "User".
Remark: Set a name for the DHCP server, such as "user50".
Gateway: Enter the IP address of the VLAN interface, which is "192.168.50.1".
Primary DNS: Enter the DNS server address of DNS proxy server address, which is
"202.96.134.133".
Start IP: Enter the start IP address of the DHCP address pool, such as "192.168.50.100".
End IP: Enter the end IP address of the DHCP address pool, such as "192.168.50.200".
4) Click Save.
To Next Page
Loading...