74
3 Example of Network Setting
3.1 WAN Interface Is Not Created
Networking Requirement
The AC is connected to two networks: the internet and the enterprise network. Requirement:
The router connected to the internet (Router2) belongs to VLAN 200 network, and the router
connected to the enterprise network (Router1) belongs to VLAN 100.
The management VLAN ID of the APs is VLAN 5.
The users belong to VLAN 6 network.
The users can access the internet and the internal server of the enterprise simultaneously.
Assumption:
All the APs are restored to the factory state.
The network segment of the enterprise network: 172.16.100.0/24. The LAN IP address of the
router connected to the server (Router1): 192.168.100.100.
The LAN IP address of the router connected to the internet (Router2): 192.168.200.100. Router2
is a DNS proxy server.
Both the two routers support creating NAT rules.
To Next Page
Loading...