The description of the route.
Only Chinese characters, letters, digits, underscores, and dashes are allowed. Bland is not
allowed. Range: 1 - 16 characters. The AC supports creating a maximum of of 512 routes.
The network segment of the destination network.
The subnet mask of the destination network.
The IP address of the next network node to which the packet is to be sent on the way to its final
destination.
The used interface when the AC accesses the destination network.
End: After the configuration is complete, you can view the information on the Network Setting > IP
Routing page. See the following figure.
The status has two states: Valid and Invalid. "Valid" indicates that the route is configured correctly. "Invalid"
To Next Page
Loading...