IPC 512 - Documentation Provided with the Machine; 3 Technical Information; General Description; Legend

ENGLISH
5
The rating plate located as shown in fig. 1, ref. 1 provides the following information:
• model;
• power supply;
• total nominal power;
• serial number;
• year of fabrication;
• weight fully loaded;
• maximum slope;
• barcode with serial number;
• manufacturer's identification.
2.2. Documentation provided with the machine
• user manual;
• guarantee certificate;
• EC certificate of conformity.
3. TECHNICAL INFORMATION
3.1. General description
This machine is a motorised sweeper designed to sweep floors in civil and industrial
premises.
The sweeper may be used to clean the residues from industrial processes, dust and dirt in
general on all relatively even flat hard surfaces such as concrete, asphalt, porcelain
stoneware, ceramic tiles, sheet metal, marble, embossed or smooth rubber or plastic mats
indoors or outdoors.
3.2. Legend
The main parts of the machine are as follows (fig. A):
• front bin (fig. A / B, ref. 2)
• rear bin (fig. A / B, ref. 1)
• display (fig. A, ref. 3)
• centre brush (fig. A / B, ref. 4), the principal organ of the machine, transfers the dust
and debris to the bin. Available in a range of hardnesses and with different bristles,
according to the type of material to be picked up.
• side brush (fig. A / B, ref. 5), conveys the dust and debris, used exclusively to clean
edges, corners and profiles.
• suction filter (fig. A / B, ref. 6), filters air drawn in by the suction fan.
• suction fan, enables the machine to sweep without raising dust.
• filter shaker, used to clean the suction filter.
• engine (INTERNAL COMBUSTION ENGINE VERSION)