Audio Record:Connect an audio device t the IP tester’s audio input port. Click the icon to enter
the Audio Recorder app. Click the red button to stop, and the unit will prompt you to save the recording.
Net work test (Ethernet bandwidth test)
To use the Network tester, you will need two IP testers. One is used as a Server and the other as a Client.
Both devices must be on the same network segment in order to communicate. Click the icon to
open the Network Tester app.
Note:Network test results only used as a reference,For more accurate test , please use a professional
Ethernet tester .
When test , need a a tester or a computer installed Network Test Software as the Server, the other tester
sends packet test.The two testers must be in the same network segment.
1. Start the server:Click “Start Server” button to use the tester as a Server. It will display its IP
address at the top of the screen.
To Next Page
Loading...