network device’s IP address
Support RS485,Rate 150 ～ 115200bps adjustable
PTZ protocol analysis, control protocol command displays to check RS485 transmission
whether is normal, easy to find the fault device
PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and
sets and the preset position
DC12V 1A output power for cameras
Audio input t test.
3.7V 3000mAh,Lithium Ion Polymer Battery can last 10 hours for normal use after charging
for 4-5 hours. Remaining battery charge indicator
“*”Sign means the function Optional
6B
2.3 Function
15B
2.3.1 Touch screen and OSD menu
The IP camera tester combines touch screen control and physical buttons. This combination makes the
tester very user friendly. The test meter allows you to move the function icons from the tester’s main
menu to the APPS tool folder or move them back to customize the main menu
16B
2.3.2 WIFI
With built in WIFI, you can view the video from a wireless camera (ONVIF or customized camera) or
connect to a Wireless network.
17B
2.3.3 IP camera test
The device is designed for ONVIF IP camera testing. It can display the image from an IP camera and
change the IP address. The 3.5 inch 320x240 screen display allows the user to view the image with a
sufficient screen size.
With the ONVIF tool, you can display the image from an IP camera and use the PTZ functions.
Currently the IP camera tester supports more than 80 brands' IP cameras, such as most, ACTi, Dahua,
To Next Page
Loading...