Brightness::Set the desired brightness of the IP tester and adjust the sleep time settings.
Volume: Set volume level.
SD Card: Displays SD Card Capacity. You can also format the SD card or unmount it before removing
it
FTP serve: Once the IPC tester connects to a network, a computer can be used to read the SD card files
via FTP.
Start the FTP server and then input the tester’s FTP address in the PC’s address bar. (ftp:
as:ftp://192.168.0.233:2121) This will enable the PC to read, copy and edit the files from the SD card
without the use of SD card reader
To Next Page
Loading...