2.3.10 Video screenshot
Capture the video image, and save it as JPEG file in the SD card.
24B
2.3.11 Record
Capture the video frames as JPEG file
25B
2.3.12 Playback
The recorded files can play directly via Media player or under the function of “Playback”.
26B
2.3.13 DHCP dynamic address assignment
Built in DHCP server: Dynamically assign IP address for the IP camera or network device.
27B
2.3.14 Access the dynamic IP address
The IP tester can directly access a dynamic IP address assigned from its DHCP server and use it as the
tester's IP address. No need to set a IP address manually.
28B
2.3.15 Multiple network IP Cameras Test
Supports Multi- segmented Static IP address setting which can simultaneously test different segments of
IP network cameras.
29B
2.3.16 Network bandwidth testing
The network bandwidth test needs two IP testers to test bandwidth: one as a transmitter, the other as a
receiver.
30B
2.3.17 IP address scan
The IP address scan can quickly search for connected IP cameras or another network device IP address.
2.3.18
PING Test
PING is the most conventional network debugging tool; it is used for testing if the connected IP camera
or other network equipment is working normally and the IP address is correct
31B
2.3.19 Port Finder
The tester will send signals to make the connected PoE port flicker at a set frequency. This will enable
To Next Page
Loading...