EN
machine from the mains power socket, in battery models, remove the fuse from the machine from the mains power socket, in battery models, remove the fuse from the
battery bridge). In cable models, the operator must always be in a position to verify battery bridge). In cable models, the operator must always be in a position to verify
that the plug remains unplugged from the mains power socket throughout mainte-that the plug remains unplugged from the mains power socket throughout mainte-
nance operations.nance operations.
All work on the electrical system and all maintenance and repair op-
erations other than those explicitly described in this manual must
be performed by personnel trained and authorised by the manufacturer.
If the power cable, plug or terminals require replacing, make sure the electrical con-
nections and cable grip are tightly fastened to guarantee the resistance of the cable
if pulled.
KEEP THESE INSTRUCTIONS SAFE.
11
To Next Page
Loading...
