EN
over or running out of control, completely empty the detergent and dirty water tanks
and remove the batteries.
Never park the machine on a slope.
Never leave the machine unattended while switched on. Before leaving it, discon-
nect the machine from the mains power supply and make sure it cannot move ac-
cidentally.
Never use the machine to transport people or goods or for towing. Do not tow the
machine.
Never rest objects of any signicant weight on the machine, for whatever reason.
Do not remove, modify or bypass safety devices (brush guards, battery covers,
fuses, electric system covers, etc.).
Always check the condition of the brush guard before operating the machine. If any
damage is found, do not operate the machine but have the guard replaced by per-
sonnel trained and authorised by the manufacturer.
Never touch the brush unless the machine is disconnected from the power supply.
The uids collected during work contain detergent, disinfectant, water and organic
and inorganic material.
They must be disposed o in accordance with current leg-They must be disposed o in accordance with current leg-
islation.islation.
Never wash the machine with water jets.
Make sure the electrical
characteristics of the machine (voltage, frequency, power) characteristics of the machine (voltage, frequency, power)
given on the nameplate correspond to those of the mains electricity supply.given on the nameplate correspond to those of the mains electricity supply.
Make sure the power sockets used for mains powered models and battery chargers
are properly earthed and protected by a 2-pole thermal magnetic switch with dif-
ferential circuit-breaker:
► rated current 15-16A
► IΔn dierential current: 0.03A
► Icn breaking capacity: 6000 A
► AC dierential breaker trip
This equipment must be earthed. In the event of a malfunction or failure, the earth This equipment must be earthed. In the event of a malfunction or failure, the earth
connection provides the path of least resistance for electrical current, reducing the connection provides the path of least resistance for electrical current, reducing the
risk of electric shock. risk of electric shock.
Mains powered versions come with a three-wire cable and a three-pin earthed plug Mains powered versions come with a three-wire cable and a three-pin earthed plug
for use in a suitable earthed socket. The earth wire is yellow and green. Never con-for use in a suitable earthed socket. The earth wire is yellow and green. Never con-
nect this wire to anything other than the earth terminal of the socket.nect this wire to anything other than the earth terminal of the socket.
The plug must be inserted into a suitable socket, correctly installed and wired in ac-The plug must be inserted into a suitable socket, correctly installed and wired in ac-
cordance with local building regulations.cordance with local building regulations.
Incorrect wiring or failure to connect the machine's earth wire may lead to a risk of Incorrect wiring or failure to connect the machine's earth wire may lead to a risk of
electrocution.electrocution.
If in doubt about the proper earthing of the power socket, have it checked by a quali-If in doubt about the proper earthing of the power socket, have it checked by a quali-
ed electrician.ed electrician.
Do not tamper with the plug tted to the machine, and use only sockets compatible Do not tamper with the plug tted to the machine, and use only sockets compatible
with this same plug. If the power socket needs to be replaced, have the job done bywith this same plug. If the power socket needs to be replaced, have the job done by
9
To Next Page
Loading...
