C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 91 –
Show Details
History Shows sampled data for each entry in the history group 440
Statistics Shows sampled data for each entry in the history group 443
Cluster 446
Configure Global Globally enables clustering for the switch; sets Commander status 447
Configure Member
Add Adds switch Members to the cluster 448
Show Shows cluster members 448
Show Candidate Shows cluster candidates 448
Show Member Shows cluster switch member; managed switch members 450
Time Range Sets active time range for various functions, including ACL and PoE 451
Add Specifies the name of a time range 451
Show Shows the name of configured time ranges 451
Add Rule 451
Absolute Sets exact time or time range 451
Periodic Sets a recurrent time 451
Show Rule Shows the time specified by a rule 451
IP 455
General
Ping Sends ICMP echo request packets to another node on the network 455
ARP Address Resolution Protocol 457
Configure General Sets the aging time for dynamic entries in the ARP cache 457
Show Information Shows entries in the Address Resolution Protocol (ARP) cache 458
IPv6 Configuration 462
Configure Global Sets an IPv6 default gateway for traffic with no known next hop 462
Configure Interface Configures IPv6 interface address using auto-configuration or link-
local address, and sets related protocol settings
463
Add IPv6 Address Adds an global unicast, EUI-64, or link-local IPv6 address to an
interface
465
Show IPv6 Address Show the IPv6 addresses assigned to an interface 467
Show IPv6 Neighbor Cache Displays information in the IPv6 neighbor discovery cache 469
Show Statistics 471
IPv6 Shows statistics about IPv6 traffic 471
ICMPv6 Shows statistics about ICMPv6 messages 471
UDP Shows statistics about UDP messages 471
Table 6: Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
