16
FAQ
How do I quickly determine a good working distance between the screen
and Sensor?
Normally, the projector is a good location to place the Sensor. If you are
using a short-throw projector, however, please refer to pages 5 and 6 for
the recom mended Sensor distance guidelines.
Can I use rechargeable AAA batteries for the Interactive Pen?
Yes. Rechargeable alkaline batteries are recommended.
Can I use IS-01 with my own software instead of IPEVO Annotator?
Yes. IS-01 can be used with third-party image processing software and white-
boards. Any mouse-based software should work fine.
How do I stop the IS-01 driver from running at start up?
Follow these steps according to your system:
Mac: System Preference -> Users & Groups -> Login item. Uncheck IS-01 Driver
PC: Start Menu -> Enter “mscong” in Run (Windows XP) or Search Bar
(Windows Vista & 7) -> Startup tab -> uncheck IS-01 Driver -> OK. Restart to
apply this setting.
What should I do if the cursor is not pointing correctly and/or following the
Interactive Pen correctly?
The cursor may lose accuracy if the screen resolution or screen ratio has
changed, or if the Sensor has been moved. Please run the calibration
program again.
Why is there no scrollbar in my browser or finder window in Mac OS X when
using IS-01?
By default, scrollbar is enabled only when a mouse is connected to Mac. You
can manually enable the scrollbar by going to System Preferences -> General
and set “Show scroll bars” to “Always” to enable scrollbars.
To Next Page
Loading...
