6
Once you’ve found the right position, it’s important to make sure your Sensor
Cam is steady and secure. There are three ways to secure your Sensor Cam,
depending on your setup:
3. Securing the Sensor Cam
• The Sensor Cam is best placed opposite the center of the screen at a
straight-on angle. However, a straight-on angle is not required for
acceptable operation, and the Sensor Cam may be placed at another
angle if necessary. Please refer to the diagram below for placement
zones according to accuracy quality:
As you can see:
• Accuracy is better when the Sensor Cam is closer to the center.
• Accuracy decreases as the angle increases.
• Larger screens require more distance between the screen and the
Sensor Cam.
Note: Please keep a clear path between the Sensor Cam and the projector screen to ensure
proper operation.
Sensor Cam Placement Zone
Installing It (cont’d)
To Next Page
Loading...
