26
Troubleshooting (cont’d)
The LED indicator of the Sensor Cam sometimes blink Orange, and the
pen trace continually breaks when I write or draw with the Interac-
tive Pen.
There might be serious interference between the wireless connection of the
Sensor Cam and the Wireless Receiver caused by nearby infrared equipment.
Try moving the positions of the Sensor Cam and/or the computer to avoid
the interference spot, or move the Sensor Cam and the computer closer to
improve their connection. Check that the LED indicator on the Sensor Cam
changes to a solid Green before continue using the Interactive Pen.
My pen trace and pointing are inaccurate after I change screen
resolution.
Changing the screen resolution throws off the calibration. Please run the
calibration process after every resolution change. See Pages 13~15.
My pen and cursor lose accuracy every now and then.
Please make sure the Sensor Cam is positioned on a flat and stable surface. A
slight tip of the Sensor Cam may result in inaccurate operation.
I have the task bar set to hidden, and I can’t use the task bar with the
Interactive Pen.
Please uncheck the auto-hide option and position the task bar on the screen
when using IW2.
To Next Page
Loading...
