What to do if IPG Photonics Measuring Instruments show Pulse Too Short error?
If your IPG Photonics Measuring Instruments display a 'Pulse Too Short' error, click Warning in the touch-screen display and read the warning message. Try to reset the error. If it appears again, contact IPG Photonics for assistance.
What to do if IPG Photonics Measuring Instruments show Critical Error?
If your IPG Photonics Measuring Instruments show a 'Critical Error', it means that the system has detected an error that is considered critical. Neither reset command (“RERR”) nor restart of the device clears this error. Contact IPG Photonics for assistance and be ready to provide the Module Error Code (RMEC command).
How to fix Optical Interlock error on IPG Photonics Measuring Instruments?
If the Optical Interlock error appears on your IPG Photonics Measuring Instruments, it indicates that either the delivery fiber cable is mechanically damaged or the output connector is not properly connected to an appropriate optical head. Send the reset error command (“RERR”). If the message persists, contact a representative from IPG Photonics for assistance.
Why do IPG Photonics Measuring Instruments show Low Temperature error?
If your IPG Photonics Measuring Instruments display a 'Low Temperature' error, it means the case temperature of the laser is too low. This message will disappear as soon as the case temperature of the laser module rises into the operating range.
General| Brand | IPG Photonics |
|---|---|
| Model | QCW YLR-1500 |
| Category | Measuring Instruments |
| Language | English |
Information on US export control compliance requirements for IPG products.
Covers safety info, compliance, features, general instructions, and classification.
Instructions for connecting the laser unit to an electrical power source.
Explains the differences between Local and Remote control modes.
Lists and explains commands for controlling the laser via interface.
Explains how to use the Pulse Shaper program interface and its menu items.
Instructions for activating single pulses, sequences, and using touch-screen control.
Lists common error messages and provides solutions for troubleshooting issues.
Information on serviceable items, safety, and repair procedures.
Overview of fiber connector inspection, cleaning materials, and procedure.
To Next Page
