Why iPower Portable Generator engine will not start?
Your iPower Portable Generator engine might fail to start because the engine switch is set to the OFF position; in this case, set the engine switch to the ON position. Another possible reason is that the fuel valve is in the OFF position; move the fuel valve to the ON position. You may also need to fill the fuel tank.
What to do if my iPower 1492007 REV00 Portable Generator has no AC output?
If your iPower Portable Generator is running but there's no AC output, it's possible the AC circuit breaker is open. Check the AC load and reset the circuit breaker. Also, if equipped, the GFCI outlet may be open; correct the ground fault and press the reset button on the GFCI outlet.
Why does my iPower Portable Generator engine shut down while running?
Your iPower Portable Generator's engine might shut down while running because it's out of fuel. Refill the fuel tank. Also ensure to follow all safety instructions on the CO Action Label.
How to troubleshoot low power on my iPower Portable Generator?
If your iPower Portable Generator lacks power, it could be due to an excessively high load. Try reducing the load. You may also need to replace the air filter, clean or replace the fuel filter, or clean or replace the spark arrester screen. Draining the gas tank and carburetor and refilling with fresh fuel may also help.
What to do if iPower 1492007 REV00 Portable Generator bogs down under load?
If your iPower Portable Generator runs well at no-load but bogs down when a load is connected, a short circuit in the connected load may be the cause. Disconnect the shorted electrical load. Reducing the load may also help. Consider cleaning or replacing the fuel filter.
General| Brand | iPower |
|---|---|
| Model | 1492007 REV00 |
| Category | Portable Generator |
| Language | English |
To Next Page
