How to increase power on my iPower SUA3800i Portable Generator?
If your iPower Portable Generator engine lacks power, consider the following: * Reduce the load on the generator. * Replace the air filter. * Clean or replace the fuel filter. * Clean or replace the spark arrester screen. * Drain the gas tank and carburetor and fill with fresh fuel if the fuel is bad.
What to do if iPower SUA3800i has no AC output?
If your iPower Portable Generator engine is running but there's no AC output, you can: * Check the AC load and reset the circuit breaker. * Connect another device that is in good condition. * Correct ground fault and press reset button on GFCI outlet.
What to do if my iPower SUA3800i Portable Generator shuts down while running?
If your iPower Portable Generator engine shuts down while running: * Fill the fuel tank. * Clean or replace the air cleaner. * Fill the crankcase to the proper level or place the generator on a level surface.
How to fix an iPower SUA3800i Portable Generator that falters?
If your iPower Portable Generator engine hunts or falters: * Replace the fuel filter. * Set the choke to the halfway position until the engine runs smoothly.
General| Brand | iPower |
|---|---|
| Model | SUA3800i |
| Category | Portable Generator |
| Language | English |
Outlines essential safety guidelines and hazard awareness for generator operation.
Guidelines for selecting a safe operating location and initial setup.
Step-by-step instructions for starting and safely shutting down the generator.
Procedures for connecting electrical devices, using the low idle switch, and managing loads.
Guidance on how to properly add loads to avoid overloading the generator.
To Next Page
