5. Scan Documents
WARNING:
The IRIScan™ Book 3 is designed to scan one page at a time. It does not generate multi-page PDF files.
Follow steps 2 to 5 below for each page that you scan.
1. Press the button for 2 seconds to power on the scanner.
2. Place your scanner at the top of the page you want to scan.
3. Press the Scan button once. The word Scan appears in the display.
4. Slide the scanner slowly and steadily over the page.
TIP: hold the document steady with one hand while scanning.
5. When you have reached the bottom of the page press the Scan button again to stop scanning.
NOTE: in case an error occurs during scanning - when scanning too fast or not levelly for instance - ERROR appears on the
display. See the section Troubleshooting for help.
6. The scan appears briefly on the display. To check it again, press the up button next to Playback.
To Next Page
Loading...
Need help?
General
