Roomba
®
j7+ Owner’s Guide 9
EN
Cleaning the Sensors, Camera Window and
Charging Contacts
Wipe sensors, camera window, and charging
contacts with a clean, dry cloth.
1
Pinch the brush-frame release tab,
lift the tab and remove any obstructions.
Remove the brushes from the
robot. Remove the brush caps
from the ends of the brushes.
Remove any hair or debris that
has collected beneath the caps.
Reinstall the brush caps.
Cleaning the Multi-Surface Brushes
Remove any hair or debris from
the square and hexagonal pegs
on the opposite side of the brushes.
Reinstall the brushes in the robot.
Match the shape of the brush pegs
with the shape of the brush icons in
the cleaning head module.
1
2
3
4
Note: Inspect the camera window. If you notice any
cracks, please contact customer care.
To Next Page
Loading...
Need help?
General
