To Next Page
D
daniellekingAug 16, 2025
What to do if iRobot Vacuum Cleaner is not picking up debris?
- WWhitney BrownAug 17, 2025
If your iRobot Vacuum Cleaner isn't picking up debris, the bin might be full. Empty the bin and clean the brushes.
What to do if iRobot Vacuum Cleaner is not picking up debris?
If your iRobot Vacuum Cleaner isn't picking up debris, the bin might be full. Empty the bin and clean the brushes.
Why iRobot Discovery/400 does not charge?
If your iRobot Vacuum Cleaner does not charge, ensure that the charger is correctly connected to the wall and to the vacuum. The charger will illuminate a solid green light when plugged into a power source.
How to fix iRobot Vacuum Cleaner main brushes that cannot turn?
If the main brushes of your iRobot Vacuum Cleaner cannot turn, turn the vacuum over and remove the brush guard by pushing the two yellow tabs. Remove the brushes, clear any obstructions, and replace them.
How to fix iRobot Discovery/400 Vacuum Cleaner side brush that cannot turn?
If the side brush of your iRobot Vacuum Cleaner cannot turn, turn it over and check for any obstructions wrapped around the side brush. Remove the side brush with a screwdriver and check for string or hair that may be wrapped around it.
Why does my iRobot Vacuum Cleaner back up frequently?
If your iRobot Vacuum Cleaner backs up frequently and behaves erratically, the cliff sensors may be dirty. Use compressed air to clean out the vacuum's cliff sensors.
What to do if iRobot Discovery/400 is stuck?
If your iRobot Vacuum Cleaner is stuck, pick it up and start it again somewhere else. You can use a virtual wall or other barrier to keep it away from the place it got stuck.
Why one of the wheels of my iRobot Discovery/400 cannot run?
If a wheel on your iRobot Vacuum Cleaner cannot run, it may be stuck, or something may be wrapped around it. Check for obstructions around the wheels. Push them in and out and make sure they turn easily.
Why iRobot Discovery/400 power light will not illuminate?
If the CLEAN/Power light on your iRobot Vacuum Cleaner does not illuminate, the battery may not be seated correctly. Remove the battery by pushing the side clips and re-insert it, ensuring you hear an audible click.
Why my iRobot Discovery/400 is not beeping?
If your iRobot Vacuum Cleaner is not beeping, it could be because a wheel is stuck or not touching the ground. Pick up the vacuum, place it securely on the floor, and touch the clean button to restart the cycle.
What to do if iRobot Vacuum Cleaner cliff sensors have failed?
If the cliff sensors on your iRobot Vacuum Cleaner have failed or are blocked, turn the vacuum over and clear any debris that might be caught underneath the front bumper in the cliff sensors. You can also use compressed air to clean them out.
Tips for optimal Roomba cleaning performance, including brush cleaning and frequent use.
Tips for extending Roomba's battery lifespan through proper charging and storage.
Instructions on how to charge the Roomba using the charger.
Instructions for emptying the Roomba's bin and cleaning the filter compartment.
Detailed steps for cleaning Roomba's brushes, bearings, and brush caps.
Explains causes and solutions for Roomba errors indicated by beep patterns.
Addresses common issues like power illumination, debris pickup, and charging.
Essential safety rules to follow before and during Roomba operation.
Limitations and precautions for using the Roomba, including environmental and user restrictions.
Safety measures related to Roomba battery charging and power supply.
General| Model | Discovery/400 series |
|---|---|
| Category | Vacuum Cleaner |
| Type | Robotic |
| Scheduling | No |
| Auto Docking | Yes |
| Battery Type | Ni-MH |
| Run Time | 60-90 minutes |
