Page 5 of 12
BBCD068 Installation Guide
©Copyright 2018 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
16. Fit side plates and trim guard
liners to suit.
15. Fit the centre under tray sitting
above factory underbody plates.
14. Connect park lights, indicators and
fog lights as per wiring diagram on
page 12.
13. Once bull bar is tightened into
place, drill and pin the bar using
supplied M10 bolts.
To Next Page
Loading...
