Page 6 of 12
BBCD068 Installation Guide
©Copyright 2018 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
1. For new vehicles with parking
sensors, the new bars will now
come with a plastic parking sensor
holder kit. The sensor mounting
kit will be inside the bar mounting
hardware box.
IMPORTANT: Parking sensors should be installed as close to the same direction
as when they sit in the factory bumper.
Plastic Parking Sensor Installation
2. The bars come with a rubber plug
in the sensors hole. This plug
needs to be pushed out if you need
to install the sensors into the bar.
To Next Page
Loading...
