Irritrol Climate Logic - Control System Synchronization; Remote PIN Setup

18
Weather Sensor Identication Feature
Control System Synchronization • Remote PIN Setup
19
Control System Synchronization
The Receiver Module and irrigation controller must remain synchronized for proper operation of Climate
Logic system operations. The Timer option of the Main Menu provides the utility features that enable
synchronization to be easily verified and updated as needed.
 •FromtheHome screen, select the Main Menu, Timer option
(MENU_TIMER_ENTER). The controller make, model and
software version will be displayed.
 •PresstheREFRESH key as needed to update the controller
information.
 •PresstheDECT (Detect) key to access the current controller
time and date setting.
Remote PIN Setup
The irrigation controller can be accessed through the Receiver
Module by a CL-R1 handheld remote device using the default
0000PINcode.AuniquePINcodecanbeappliedtotheReceiver
Module to provide discrete remote control access as preferred.
 •FromtheHome screen, select the Main Menu, Sensor option
(MENU_SENSOR_ENTER).
 • Pressthe or key to adjust the selected value.
 • PresstheNEXT key to select the next value in sequence.
 • WhenthePINisdisplayedcorrectly,presstheSAVE key.
Weather Sensor Identication Feature
Within the Sensor Setup screen, the Weather Sensor ID can be
easily viewed, and pairing removed/replaced as needed.
 •FromtheHome screen, select the Main Menu Sensor option
(MENU_SENSOR_ENTER). The ID number of the currently
paired Weather Sensor will be displayed.
 •To remove and replace the currently-paired Weather Sensor,
press the REMOVE key to display the Remove Sensor screen.
Important: A new Weather Sensor must be activated before it
can be paired with the Receiver Module. See page 9 for details.
 •PresstheYES key the display Sensor Setup/Add Sensor screen.
 •PresstheADD key to initiate the sensor ID search function.
 •PressandreleasetheWeatherSensorTest Pin to “Ping” the
Receiver Module. When pairing is successful, the 7-digit sensor
ID is displayed.
Sensor Setup
ET Sensor ID: 0123456
Successful
Sensor Found
EXIT
Timer
IRRITROL Rain Dial
Version: 03.00.02
EXIT DECT REFRESH
Remote Pin
0 0 0 0
SAVE BACKCANCEL NEXT
REMOVE SENSOR?
NO YES
Sensor Setup
ET Sensor ID: 0065157
EXIT REMOVE VIEW